The bathroom and laundry zones are the most demanding spaces in a home in terms of operating load. Constant temperature swings, high humidity and direct contact with water leave no room for mistakes in the choice of materials and construction.
When designing built-in furniture for wet zones, the Kult Interiors team focuses on precision engineering and uncompromising protection of every joint.
1. Materials and moisture-protection technologies
Ordinary wood-based boards deform quickly in a humid environment. Specialized solutions are used so the furniture keeps its geometry for years:
- PUR edgebanding (polyurethane adhesive): Unlike standard EVA adhesive, PUR creates a monolithic and fully waterproof joint between the board and the edge. It does not soften in steam and protects the edges from moisture ingress.
- Moisture-resistant MDF and enamel: Bathroom fronts use a high-density board with a water-repellent treatment, finished with several layers of isolator, primer and premium enamel.
- Combination with sintered stone and compact board: Worktops under basins use HPL compact laminates and large-format ceramics, which are completely inert to water.
2. Wall-hung vanities: loads and engineered installation
Floating vanities under basins are a standard of contemporary design, but they require a reliable calculation of cantilever loads:
- Reinforced metal frame: When heavy cast-marble or sintered-stone basins are installed, a concealed steel frame is engineered inside the carcase.
- Specialized wall fixings: Adjustable premium hangers rated for high static and dynamic loads.
- Cut-outs for traps: Hygienic traps and compact Blum drawer systems with a cut-out for services, so the usable drawer volume is preserved as fully as possible.
3. Hidden laundry and cladding above the installation frame
Integrating washing machines and dryers into a single furniture composition keeps the interior visually restrained.
- Ventilation for built-in appliances: Dryers release a large amount of heat. Concealed ventilation grilles and technical gaps are built into plinths and cabinet backs so air can circulate.
- Access to service points: Furniture fronts above the sanitary installation frame are designed with easily removable panels or concealed inspection hatches for unobstructed access to manifolds and meters.
The right choice of materials, uncompromising edgebanding and considered ventilation make it possible to build bathroom furniture that keeps its original appearance throughout its service life.