One of the most common questions clients and designers bring to Kult Interiors is what a custom kitchen costs in Warsaw. The furniture market still uses a price per linear metre, but in practice that figure does not show the budget. Two kitchen runs of the same 4-metre length can differ in cost by two or three times, depending on the internal fittings, the cabinet height and the materials.
To plan a renovation budget accurately, we split the estimate of a modern custom kitchen into four main parts.
1. Facade and visible panel materials (30–35% of the budget)
The visual status of a kitchen and how it feels to the touch come from the facade material. In floor-to-ceiling projects the facade area grows, which changes the calculation directly:
- Premium laminated board (Egger, Kronospan, Cleaf): A practical option with a deep synchronised wood or stone texture. A sound choice for keeping the budget down or combining with more expensive materials.
- Lacquered MDF and acrylic panels (Fenix): The standard of contemporary minimalism. A matt enamel can take any RAL or NCS shade, with integrated routed handles and no visible edge seams.
- Natural veneer and special finishes: Facades faced in natural oak, ash or American walnut veneer with a matched grain, and MDF with a metallic coating, sit in the top price band because of the manual sanding and lacquering cycle.
2. Hardware and pull-out mechanisms (25–30% of the budget)
The contents of the base and wall units are the second-largest cost. The rule of the estimate: drawers and lift systems always cost more than standard hinged doors with shelves, and they are what make the kitchen comfortable to use.
- Runner systems: Premium runners with slim metal sides (for example Blum Legrabox or Merivobox) keep a smooth action under a load of 40–70 kg per drawer.
- Lift systems and handleless openings: Folding and vertical Blum Aventos lifts for the upper tier, a Gola profile, or Servo-Drive electric openers for the refrigerator and dishwasher raise both comfort and the technical level of the kitchen.
- Complex storage: Cargo pull-out columns, Magic Corner systems for blind corners, and display cabinets in an aluminium profile with tinted glass are priced individually.
3. Worktop, kitchen island and splashback (15–25% of the budget)
The work surface takes the main mechanical and heat load:
- HPL laminated worktops: An affordable, wear-resistant option with a wide range of wood, concrete and stone decors.
- Compact board (HPL Compact 12 mm): A thin, high-density monolithic slab that is unaffected by water and allows an undermount sink.
- Large-format sintered stone (spiek kwarcowy) and quartz agglomerate: A premium choice for kitchen islands with floor-standing waterfall ends, 45-degree mitred corners and a seamless hob integration.
4. Hidden engineering, lighting and installation (10–15% of the estimate)
How long the furniture lasts depends on details that are not obvious at first glance:
- Moisture-resistant PUR edging: Polyurethane glue on every cabinet part protects the board from swelling when it meets water and steam.
- Integrated lighting: Routing the cabinets for aluminium LED profiles, fitting touch sensors, and concealing power supplies so they can still be serviced.
- Laser survey and final assembly: Fitting floor-to-ceiling cabinets on site in Warsaw and the surrounding area takes 2 to 5 working days.
How to trim the budget without losing quality
In practice Kult Interiors often combines materials. An accent island and the upper sections may use natural veneer or a complex enamel routing, while tall units and the inner cabinets are made from textured Egger board with Blum hardware. That keeps the estimate inside the planned range and preserves the look and the reliability for years.
Questions and answers
What does a custom kitchen cost in Warsaw?
There is no fixed price: two runs of 4 metres can differ by two or three times. The estimate depends on the fittings, the cabinet height and the materials, not on the linear metre. Kult Interiors splits it into facades (30–35%), hardware (25–30%), the worktop (15–25%) and hidden engineering with installation (10–15%).
Why does a price per linear metre fail to show the budget?
Two kitchen runs of the same 4-metre length can differ in cost by two or three times because of the internal fittings, the cabinet height and the materials. Length alone does not set the budget.
What share of a kitchen estimate do the facades take?
Facade and visible panel materials take 30–35% of the budget. In a floor-to-ceiling kitchen the facade area grows and raises the calculation directly. Lacquered MDF and Fenix give a matt enamel with no visible edge, while natural veneer sits higher because of manual sanding and lacquering.
What costs more in a kitchen: drawers or hinged doors?
Drawers and lift systems always cost more than hinged doors with shelves. Hardware is 25–30% of the budget. Blum Legrabox or Merivobox runners are rated for 40–70 kg per drawer, and Blum Aventos, a Gola profile and Servo-Drive are priced separately.
What share of the estimate does the worktop take?
The worktop, island and splashback are 15–25% of the budget. HPL Compact at 12 mm is unaffected by water and allows an undermount sink. Large-format sintered stone and quartz agglomerate are used for islands with waterfall ends and 45-degree mitred corners.
How many days does a kitchen installation take in Warsaw?
Final assembly of floor-to-ceiling cabinets on site in Warsaw and the surrounding area takes 2 to 5 working days. Hidden engineering, lighting and installation are 10–15% of the estimate. PUR edging protects the cabinet from water and steam.
How can the kitchen estimate be reduced without losing quality?
Kult Interiors combines materials: the accent island and upper sections are made in veneer or enamel with complex routing, while tall units and inner cabinets use Egger board with Blum hardware.